Download CGTech VERICUT 9.6.2

Verification
– Issues of unexpected termination have been corrected.
– An issue of STEP files not being read correctly has been resolved.
– An issue of NC Program Step Back icon not displaying been corrected.
– An issue of wrong tool direction warning not generating under certain situations has been corrected.
– An issue of Cutcom Sketch files not resetting when prompted has been corrected.
– An issue of Interpolate Rotary Motion not working properly with Circular Interpolation has been corrected.
– Issues of File Summary not removing referenced toolpaths has been corrected.
– An issue of Save CAS File not working as desired has been corrected.
– An issue of copy/paste feature not functioning in Project Tree has been corrected.
– An issue of APT simulation not parsing special characters has been corrected.
– An issue of Status panel not updating when certain IP files are loaded has been corrected.
– An issue of Tool Summary times not matching has been corrected.
– An issue of unexpected slowdown has been corrected.
Machine Simulation
– An issue of collision displaying incorrectly when tool and spindle are active has been resolved.
– An issue of incorrect spindle direction being applied has been resolved.
– An issue of tapping cycle slowdown has been corrected.
– An issue of design model not moving with cut stock under certain conditions has been corrected.
– An issue of part not transferring from main to subspindle has been corrected.
– An issue of remove material function not working when break points are present in G-Code has been corrected.
– An issue of incorrect collisions generating has been corrected.
– An issue of cutting limits not being read properly has been corrected.
G-Code Processing
– An issue of Tool Descriptions disappearing from Variables panel has been corrected.
– An issue of Merge IP Files failing with locked machine and control files has been corrected.
Optimization
– An issue of Learn from NC Program misapplying the Force Limit Ignore option has been corrected.
– An issue of Batch Mode not working with Optimization Learn Mode has been resolved.
– An issue of Mouse Followers not aligning properly in Graphs has been corrected.
– Issues of values on Graphs panel not being consisted with other panels and windows have been corrected.
– An issue of Optimization controls not working with turrets has been corrected.
– An issue of Force outputting excessive cleanup values has been corrected.
Tool Manager
– An issue of .tls files not being read correctly has been resolved.
– Issues of tool name and value reverting on reload have been corrected.
– An issue of insert being immovable has been corrected.
– An issue of referenced Holder not aligning properly has been corrected.
– An issue of turn tools defining incorrectly when paired with STL cutters has been resolved.
– An issue of change cutter model feature not working as desired has been corrected.
– An issue of referenced tools disappearing from turrets has been corrected.
– An issue of stock material records doubling when .tls file is saved has been corrected.
– An issue of .tls values generating erroneous position values has been corrected.
– An issue of tool component generating incorrectly has been resolved.
– An issue related to selecting cutting face creating an incorrect definition has been resolved.
– Issues of Tool Manager deleting certain model files during save has been corrected.
– An issue of tool header changing between versions has been corrected.
– An issue of CoroPlus Tool not importing taps correctly has been resolved.
– Issues of Tool Manager experiencing unexpected termination or slowdown have been corrected.
– An issue of Driven Point not working as desired has been corrected.
– Issues of insert thickness not working with Sweep Profiles have been corrected.
– An issue of Search Tool not working as desired has been corrected.
– An issue of Driven Point Zero not working as desired has been corrected.
– An issue of incorrect tool representation has been resolved.
– An issue of incorrect tool geometry has been resolved.
– An issue of referenced tools vanishing has been corrected.
Interfaces
EdgeCAM
– An issue of ECV files not exporting correctly has been resolved.
GibbsCAM
– Issues of taps not defining correctly has been resolved.
– An issue of stock models generating in incorrect locations and orientations has been resolved.
MasterCAM
– Issues of MCAMV not exporting certain tools properly have been corrected.
– An issue of stock loading in incorrect location has been corrected.
NXV
– An issue of NXV transferring incorrect Driven Point IDs has been resolved.
– An issue of NXV not exporting to correct attach point has been resolved.
– An issue of NXV not outputting quadrant cutter correctly has been resolved.
PROEV
– An issue of Creo interface window not displaying entire name of certain functions has been corrected.
– An issue of cutters disappearing has been corrected.
– An issue of incorrect insert generating has been resolved.
– An issue of PROEV not setting correct probe length has been resolved.
Zoller
– An issue of turning tools incorrectly importing as mill tools has been resolved.
X-Caliper
– An issue of Annotate Tool not creating diameter dimensions has been corrected.
Reports
– An issue of Report Table rows disappearing during PDF creation has been corrected.
– An issue of cutter diameter being misreported has been corrected.
– An issue of machine metrics table not generating has been corrected.
– An issue of Start / End of Process Image not working as expected has been corrected.
Probing
– An issue of Probing not working correctly on thread part has been resolved.
Reviewer
– An issue of Toolpath Trace not working as desired has been corrected.
– An issue of slowdown when saving under certain conditions has been corrected.
Documentation
– Several undocumented macros have been added to the Vericut Macros section of the Vericut Help.

AutosetToolManLengthOSPVars
BeckhoffForLoop
CaseBreak
CaseElse2
CaseValues2
ClampPressure
ConversionFinishLoopCount
DeleteCutStock
FanucCrossChannelVariableOnOff
IfBlockIfCheck2
SiemensInterpolationLogic
SiemensPAROTToolsideIgnore
TextVariableConcat2
WTapeEIOnPartScrap

Smarter Support with AI
Vericut 9.6 introduces two transformative AI-driven tools that redefine how users interact with the software:
– Vericut Assistant (VA) – An integrated in-software guide that delivers instant, context-aware support. Whether users are looking for help with settings, simulation steps, or tool configurations, VA answers “How do I…” questions right within the interface — reducing training time and unlocking more value from Vericut’s robust features.
– Vericut Intelligence (VI) – A web-based knowledge hub that provides 24/7 access to AI-powered insights across Vericut’s full suite — including Force, Composites, Optimizer, and more. From broad concepts like “What is Force?” to specific features like “X-Caliper,” VI offers a smart, searchable companion for all things Vericut.

Better Communication & Control
Vericut Reviewer — the free tool for reviewing NC programs — has been upgraded to support AUTO-DIFF results, while improvements to the UI add HUD status displays and custom hot keys, making it easier to review, share, and analyze simulations across teams.
Key Enhancements in Vericut 9.6
– PMI Data Support: Display and document 3D Product Manufacturing Information (PMI), including dimensions and annotations compliant with ISO 10303/STEP AP242 standards.
– Turning Upgrades: Define driven points more accurately and automatically qualify tools for faster, more precise lathe setups.
– Streamlined Optimization: A simplified Optimization Control window and default tool data make it easier to fine-tune feedrates and improve cutting performance with fewer clicks.
– New Interfaces: Extended support for Siemens Run MyVirtual Machine and Fanuc Robot T.P. language.
– CAD/CAM Updates: Expanded support in multiple interfaces, including NX auto-loading of stock, fixtures, and designs.
– Additional Improvements: New report templates, enhanced machine connectivity, solid model textures, and better tool import from MachiningCloud

Verification
– New Stop At: Sync option has been added to simulation playback.
G-Code Processing
– New FeedPerMinuteType macro value option added to calculate feed rates more accurately.
– New SiemensORISOL2SpindleOrient macro added to support Siemens ORISOL when spindle is not at zero.
– New BeckhoffCondLeftBracket conditional created to better control branching.
– New SiemensInterpolationLogic macro created to help with engraving motions.
Tool Manager
– Tool description fields now expand to display longer descriptions.
– An issue of CAS file not exporting ply holders has been corrected.
– An issue of Tool Manager not saving “Do Not Spin with Spindle” settings has been corrected.
– An issue of EndMill tool not referencing the correct profile has been resolved.
– An issue of Auto Driven Point not working as desired has been corrected.
– Issues of Auto Gage not working as desired have been corrected.
– An issue of changing stickout length not applying to selected holder has been corrected.

Interfaces

GibbsCAM
– GibbsCAM interface has new filtering options.
Reports
– A Report File Name field has been added in Die Sinking Simulation dialog to customize where
– Die Sinking Simulations are saved for Reports.
– Added option for Die Sinking Report to output in batch mode