Download Protective Coating Corrosion Control 2024
Protective Coating Corrosion Control udemy video course download, CIP (coating Inspection program), Painting Technology, BGAS-CSWIP painting inspector grade 2. Unprotected steel in the atmosphere, in water and in soil is subject to corrosion that may lead to damage. Therefore, to avoid corrosion damage, steel structures are normally protected to withstand the corrosion stresses during the service life required of the structure. This course deals with protection by paint systems and covers, in the various parts, all features that are important in achieving adequate corrosion protection.
Inspectors of protective coatings and manufacturers of coating materials to have at their disposal state-of- the-art information in concise form on corrosion protection by paint systems. Such information has to be as complete as possible, unambiguous and easily understandable to avoid difficulties and misunderstandings between the parties concerned with the practical implementation of protection work.
- Our course will start with small introduction about corrosion explain basic corrosion cell followed by coating protection theory though Barrier effect, Inhibitor effect and Galvanic effect.
- Paint composition (Binder, Pigments, Solvents, Additives), paint curing and drying mechanism by Oxidatively drying, physically drying / Solvent Evaporation, chemically curing, and IR/UV – cured.
- A paint system is one or more layers of paint, which will give corrosion protection
- Surface preparation by Dry abrasive blast cleaning, Wet blasting, Hand and power tool cleaning, Flame cleaning, Pickling (chemical cleaning), Vapor degreasing, Weathering
- Paint application, Quality control and inspection before, during and after application and finally paint failure
What you’ll learn
- introduction about corrosion explain basic corrosion cell followed by coating protection theory though Barrier effect, Inhibitor effect and Galvanic effect
- Paint composition (Binder, Pigments, Solvents, Additives)
- Paint curing and drying mechanism by Oxidatively drying, physically drying / Solvent Evaporation, chemically curing, and IR/UV – cured
- A paint system is one or more layers of paint, which will give corrosion protection
- Preparation surface by Dry abrasive blast cleaning, Wet blasting, Hand and power tool cleaning, Flame cleaning, Pickling (chemical cleaning) andVapor degreasing
- Paint application, Quality control and inspection before , during and after application and finally paint failure
Course content
- Section 1: Introduction
- Lecture 1 Introduction
- Lecture 2 corrosion introduction
- Section 2: corrosion protection by coatings
- Lecture 3 corrosion protection by coating
- Section 3: paint composition
- Lecture 4 paint composition part1
- Lecture 5 paint composition part2
- Section 4: Drying and curing of paint film
- Lecture 6 Drying and curing of paint film
- Section 5: paint system
- Lecture 7 paint system
- Section 6: surface preparation
- Lecture 8 surface preparation part1
- Lecture 9 surface preparation part2
- Section 7: paint application
- Lecture 10 paint application
- Section 8: Inspection and control
- Lecture 11 Inspection and control of paint part1
- Lecture 12 Inspection and control of paint part2
- Lecture 13 Inspection and control of paint part3
- Lecture 14 Inspection and control of paint part4
- Section 9: calculation of paint consumption
- Lecture 15 calculation of paint consumption
- Section 10: Paint failure
- Lecture 16 paint failure
Who this course is for:
- Beginner, Engineer, Student, Paint inspectors
- mangers, Technicians, Chemical and petroleum industry specialists
Course details
- Video quality: MP4 | Video: h264, 1280 × 720
- Audio quality: Audio: AAC, 44.1 KHz, 2 Ch
- Video duration: 5h 30m
- Number of lessons: 10 sections, 16 lectures
- Language: English
- Compressed file size: 3.49 GB
