Download FireCAD Fire Tube Boiler 3.0

FireCAD Fire Tube Boiler software full crack download and In Fire tube boilers, water is contained in a shell and hot gases pass through the tubes. Burners are provided to fire the fuel inside the furnace. In case of solid fuels, stationery or movable chain grates are provided inside the furnace. Fire tube boilers can be either wet back or dry back. In wet back boilers, turnaround channel or reversible chamber is present at the rear end of furnace.

Fire tube boilers can be two pass, three pass or four pass type. in regular scotch marine boilers, fuel is fired in furnace and the hot gases pass thorough second and third pass before leaving the boiler to chimney. In revotherm or reversible flame boilers, fuel is fired and hot gases are reversed in the same furnace and enter the second pass at the front side. Most of these boilers are integral steam space type and a few elevated drum type. In case of elevated drum type, bottom evaporator is connected to top steam/water drum with riders and downcomers. Boiler repairs and maintenance are minimum in fire tube boilers. Many of these boilers are also available on rent (boiler rental) and used as mobile boilers.

 

What's new in FireCAD Fire Tube Boiler Version 3.0

Fire Tube Boiler

  • Now users can design 2-Pass, 3-Pass and 4-Pass Boiler.
  • Backend Economiser added.
  • Hot Water Generator for waste gases added.
  • Shell diameter calculations for Integral Steam space as well as Elevated Drum Type Boilers added.
  • Provision for Backend Economiser added.
  • Economiser type can be Bare Tube/ Fin Tube / Gill Tube. Standered database of Fins/Gills is added. Users can select the type of fin /gill from dropdown menu.
  • Textboxes for Ambient Temperature, Relative Humidity, Fuel Sensible Heat and BlowDown added.
  • Basic Mechanical design as per Boiler codes added. Boiler shell thickness, Tube thickness with internal/external pressure can be calculated. FireCAD comes with two default codes of BS and IBR.
  • Provision to add other codes like DIN, JIS, ASME ..etc is available.

Fire Tube Boiler Design Software Features:

  • Fire tube Boiler design software is useful for designing Fire Tube Package Boilers and Waste heat boilers. Different types of fire tube boilers like oil fired boilers,gas fired boilers and coal boiler and other solid fuel fired boilers can be designed using this software.
  • Useful for novice as well as expert design engineers for quick and accurate designs.
  • FireCAD comes with Fuel and Waste gases database.
  • Smoke Tube (Fire Tube) Package Boilers of any range and pressure, Solid, Oil, Gas fired, Wet back or Dry back and 2,3,4 pass Boilers can be designed.
  • Similarly Waste heat boilers (Fire Tube) for Chemical/DG set/Process/Metallurgical/Power plants can be designed.
  • Fired/Unfired Hot Water Generators can be designed.
  • Option to include Economiser with Bare/Fin/Gill tubes.
  • Shell diameter calculations for Integral Steam space as well as Elevated Drum Type Boilers added for Waste Heat Boilers.
  • Useful for the design of oil boiler, gas boiler, coal boiler, bagasse, bio-mass boiler, hot water boiler, fire tube boiler for fired and unfired applications, integral steam space and elevated drum type boilers,

General Features of FireCAD software:

  • Optimum design with AutoDesign feature
  • Extensive Fuel database.
  • Custom Fuels can be added to database
  • Extensive help giving Design methodologies, Design tips and Good Engineering practices
  • detailsed report of the final design with Print option
  • MKS/SI/FPS units supported

FireCAD Fire Tube Boiler software details:

  • Supported operating systems: Windows 7/ 10/ 11
  • File size: 2.5 MB
  • Crack: full crack (unlimited system)
4.8/5 - (25 votes)

Leave a Reply

Your email address will not be published. Required fields are marked *