Download Mastering ANSYS CFD Course 2023-10
Udemy – Mastering ANSYS CFD video course download, become pro in computational fluid dynamics (CFD) from A to Z using Fluent, CFX, ICEMCFD and Ansys Workbench. Complete CFD Course to teach you CFD from A-Z. Specially designed for students who have no prior knowledge of any CFD software. We will teach you from scratch and work through to understand all important commands and concepts to understand CFD and its application to sample problems. There are many lectures available as preview (free) and based on them decided yourself about the quality of your CFD learning. I would be very much happy to see you on this course.
What you will get in this course:
- 1. Complete guidance of using commercial CFD codes such as Fluent, CFX, ICEMCFD, Ansys Meshing, Designmodeler and Ansys Workbench.
- 2. How to define problem, create geometry, clean and prepare geometry, hexa and tetra mesh generation in ICEMCFD and Ansys Meshing, problem setup in CFX Pre or Fluent, problem solution in both CFX and Fluent solver, Post processing Fluent and CFD Post.
- 3. Teach you that how to check mesh independence in order to make the CFD results error free due to common mistakes during CFD simulation.
- 4. Enable you to compare results with experimental data to access the results accuracy and quality.
- 5. Finally we teach you that how to conclude the results and how to discuss results in accordance with physics of problem. Which is needed when you are writing your project report, thesis report or research paper for conference of journal.
- 6. New section on mixing of two fluids with extensive post processing is added on Feb 05, 2020. In this section I have used ANSYS 2019 R3 and made very extensive post processing including mesh independence. This problem is solved inside workbench completely.
- 7. New section on double contraction pipe with 90 degs bend is added on July 12, 2020. Here you will learn Hexa meshing (Multizone) of complex geometry with solution in Fluent and Post processing in CFD-Post.
- 8. New section on effect of swirler geometry on mixing and heat transfer in Mixing Elbow, added on March 18, 2021.
- 9. New section on effect of dimple (passive flow separation control device) on separation on inside of mixing elbow, added on March 23,2021.
- 10. New section on CFD Analysis of NACA 4412 cambered Airfoil added on August 19, 2021. (Section 15)
- 11. New section on determining Nusselt number in turbulent pipe flow added on April 9 2023.
What you’ll learn
- How to understand problem and get important parameters.
- Setup problem using different CFD tools such as Fluent, CFX, ICEMCFD, Design modeller, Ansys meshing etc
- Comparison of experimental or analytical data or available high quality CFD data to your own CFD analysis
- Should be able to solve any CFD problem from starting to final results.
Course content
- Introduction to the course and how to use course effectively
- Workshop 1: Laminar pipe flow – Making geometry in Ansys Design modeler
- Workshop 1: Laminar pipe flow – Geometry in SpaceClaim (Not compulsory)
- Workshop 1: Laminar pipe flow -Hexa meshing in Workbench (Not necessary)
- Workshop 1: Ansys Meshing: Tetra + Prism mesh in workbench (Compulsory)
- Workshop 1: Laminar pipe flow – Tetra-prism mesh in ICEMCFD (not necessary)
- Workshop 1: Hexa meshing of cylinder in ICEMCFD (Not compulsory)
- Workshop 1: Laminar pipe flow – Problem setup in ANSYS CFX Pre
- Workshop 1: Laminar pipe flow – Running case in CFX Solver
- Workshop 1: Laminar pipe flow – CFD-Post
Course details
- Video quality: MP4 | Video: h264, 1280 × 720
- Audio quality: Audio: AAC, 44.1 KHz, 2 Ch
- Published 01/2023
- Video duration: 34h 59 m
- Number of lessons: 40 sections, 235 lectures
- Language: Language: English
- Compressed file size: 22 GB
